Hipulse U Series UPS Three three-type (three-phase input, three phase output) the intelligent online uninterruptible power supply system, a total of five sizes, single rated output power: 120kVA, 160kVA, 200kVA, 300kVA, 400kVA, 6 of machine can run directly in parallel.
Mainly applies to: large IDC rooms, bank / securities settlement center, communications network management center, semiconductor production lines, as well as large-scale automated production control system.
Product Features:
1.Line double conversion design, completely isolated from the mains and oil machine there may be all kinds of power grid pollution and grid failure load.
2.Output power factor increased to 0.9, more adapted to large-scale power factor correction technology server computer and network center, with the capacity to increase 10% more than traditional UPS;
3. 6th generation advanced DSP digital control technology, higher system stability;
4.A variety of input harmonic suppression technology, to improve energy efficiency;
5.Zero phase shift output isolation transformer, to reduce the impact of the zero-to-ground voltage and load harmonic current of the inverter;
6.Super output overload and short circuit capacity, to ensure the stability of the system and limit state system security;
7.State-of-the-art distributed independent parallel technology, without centralized bypass cabinet, 6 parallel;
8.Wide input voltage and frequency range, harsh grid environment;
9.Standard input and output filters, enhance system electromagnetic compatibility;
10.Intelligent battery management, automatic battery maintenance and extend the service life;
11. 6-inch large LCD display, English display interface, user-friendly;
12.Stratified independent sealed duct and redundant fan design, circuit board, three anti-paint protection, built-in dust filter, the effective protection with efficient heat dissipation and harsh environment.
Hipulse U uninterruptible power supply system
160kVA/144kW 200kVA/180kW 300kVA/270kW 400kVA/360kW
6 pulse 12 pulse pulse 12 pulse pulse 12 pulse pulse 12 pulse
Physical parameters
Width (mm) 1250 1640 1250 1640 1640 2280 2280
D × H (mm) 875 × 1900 875 × 1900 875 × 1900 875 × 1900 875 × 1900 875 × 1900 875 × 1900
Weight (kg) 1200 1725 1350 2000 1600 2200 2100 2750
Input characteristics (rectifier)
Rated input voltage-380/400/415VAC, three-phase three-wire
Rated working frequency 50/60Hz
Input voltage range of ± 15% (25% adjustable)
Input frequency range 45Hz ~ 65Hz
Input power factor up to 0.99 (plus harmonic filters)
Input current harmonics (THDi) <4.5% (plus harmonic filter)
,5-300 seconds can be set to enter the the power slow start function
Rectifier output characteristics
Charger output voltage accuracy of 1%
The DC ripple low pressure ≤ 1%
The output characteristics (inverter)
The inverter output voltage 380/400/415VAC, three-phase, four-wire
Output power factor 380/400/415VAC, three-phase, four-wire
Steady state voltage stability <± 0.5% typ.
Transient <± 3% typ.
Steady-state response time <5ms
Inverter overload capacity power factor 0.9, 110% of the 1-hour, 125% of the 10-minute, 150% 60 seconds
Phase shift of <1 ° with a 100% balanced load
With 100% of the uneven load <1 °
Linear load <1% total harmonic content (THDv) 100%
100% non-linear load <3%
Bypass
Bypass input voltage-380/400/415VAC, three-phase four-wire
Other values within the range of -20% to 15% of bypass voltage range can be set by software
System
Frequency 50Hz/60Hz
Mains synchronization tracking range of ± 5%
Measured frequency accuracy (internal clock) 50Hz/60Hz ± 0.02%
System efficiency can be as high as 94% (full load) (inverter efficiency up to 98%)
Work environment
Operating temperature range of 0 to 40 ° C
Storage temperature -25 to 70 ° C (without batteries)
0 to 95% relative humidity non-condensing
Maximum operating height ≤ an altitude of 1000m, 1000m above for each additional 100 m, the load carried by a decrease of 1%
Noise (1m) 58 ~ 68dB
Degree of protection IP20
Compliant Safety: IEC60950-1, IEC62040-1-1, UL1778, electromagnetic compatibility: IEC62040-2 CLASS A, EN50091-2 CLASS A
Design and test: IEC62040-3
|
